Technical Data
We have included technical data for the following: Mechanical Tachometers Specifications, Electrical Gauge Specifications, Mechanical Gauge Specifications, Modular Gauge Specifications, and our PMA Eligibility List. If you need assistance with other technical data requirements, please contact us.
Mechanical Tachometer Specifications
3-1/8 Inch Mechanical Tachometer, Unlighted
Scale Range: 300 RPM to 3500 RPM
Mounting: Standard 3-1/8 Inch Instrument
Weight: 13 Ounces
Accuracy: +/- 25 RPM between 1000 RPM and 3000 RPM
Mechanical Tachometer Specifications
3-1/8 Inch Mechanical Tachometer, Lighted
Scale Range: 300 RPM to 3500 RPM
Mounting: Standard 3-1/8 Inch Instrument
Weight: 14 Ounces
Accuracy: +/- 25 RPM between 1000 RPM and 3000 RPM
Mechanical Tachometer Specifications
2-1/4 Inch Mechanical Tachometer, Unlighted
Scale Range: 500 RPM to 3300 RPM
Mounting: Standard 2-1/4 Inch Instrument
Weight: 11 Ounces
Accuracy: +/- 25 RPM between 1000 RPM and 3000 RPM
Tachometer Installation Instructions
Electrical Gauge Specifications
12 Volt Applications
24 Volt Applications
Mechanical Gauge Specifications
0
Modular Gauge Specifications
Gauges are 1-1/2 inches square
All gauges plug in from the front of the panel
– Ease of Installation
– Ease of Diagnostics
– Ease of Maintenance
Gauges may be stacked horizontally and vertically
– Horizontal or Vertical strips
– Horizontal or Vertical blocks
– User-defined sequence within strips or blocks
Gauges are internally lighted
Gauges are mechanically keyed to prevent gauge insertion in the wrong location.
Panel cutout is defined as: dimension = (0.020 + (# Gauges X 1.520)) inches
Example: For a cluster 3 gauges wide by 2 gauges high
the vertical cut is (.020 +(2 X 1.52)) or 3.06 inches
the horizontal cut is (.020 +(3 X 1.52)) or 4.58 inches
Gauge mounting frames have a 1/2 inch flange around the periphery of the gauges for mounting the frame to the panel. Mounting holes are supplied by the user.
Gauges operate on either 14 or 28 volts. Power selection configuration is accomplished at the mounting frame connector. This must be specified at the time of order. Field conversion is not recommended and voids the warranty.
Gauge accuracy is specified as +/-5% of full scale.
Recommended depth behind the panel to clear the wiring harness is 4-1/2 inches.
Gauge wiring definition:
PMA Eligibility List
PMA Eligibility Approvals
2-1/4 Inch Gauges
| Part Number | Gauge Function | Aircraft Manufacturer | Model |
|---|---|---|---|
| D1-211-5030 | Flap Position | General Avia | F22B, F22C, F22R |
| D1-211-5056 | 100 Psi Oil Pressure | American Champion | 7AC, 7ACA, S7AC, 7BCM, 7CCM, S7CCM, 7DC, S7DC, 7EC, S7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCB, 7GCBA, 7GCBC,7HC, 7JC, 7KCAB, 8KCAB, 8GCBC, F22C, F22R |
| D1-211-5062 | 15 PSI Fuel Pressure | Alliance (Helio) | H-391B, H-395, H-395A, H-250, H-700, H-800 |
| D1-211-5072 | Fuel Qualtity (90 Ohm) | Thorp | T211 |
| D1-211-5076 | Fuel Quantity (30 Ohm) | Alliance (Helio) | H-391B, H-395, H-395A, H-250, H-700, H-800 |
| D1-211-5088 | 250 F Oil Temperature | Alliance (Helio) | H-391B, H-395, H-395A, H-250, H-700, H-800 |
| D1-211-5090 | 300 F Oil Temperature | American Champion | 7AC, 7ACA, S7AC, 7BCM, 7CCM, S7CCM, 7DC, S7DC, 7EC, S7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCB, 7GCBA, 7GCBC,7HC, 7JC, 7KCAB, 8KCAB, 8GCBC |
| D1-211-5102 | 600 F CHT | Alliance (Helio) | H-391B, H-395, H-395A, H-250, H-700, H-800 |
| D1-211-5106 | 60 Amp Ammeter | American Champion | 7AC, 7ACA, S7AC, 7BCM, 7CCM, S7CCM, 7DC, S7DC, 7EC, S7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCB, 7GCBA, 7GCBC,7HC, 7JC, 7KCAB, 8KCAB, 8GCBC |
1-1/2 Inch Modular Gauges
| Part Number | Gauge Function | Aircraft Manufacturer | Model |
|---|---|---|---|
| D1-211-6010 | Blank Filler Module | Zenair | CH2000, CH200A |
| D1-211-6061 | 15 PSI Fuel Pressure | Zenair | CH2000, CH200A |
| D1-211-6066 | 300 F Oil Temperature | Zenair | CH2000, CH200A |
| D1-211-6068 | 250 F Oil Temperature | American General | AA-1, AA-1a, AA-1B, AA-1C, AA-5, AA-5a, AA-5B |
| D1-211-6074 | Right Fuel Quantity | Zenair | CH2000, CH200A |
| D1-211-6075 | Left Fuel Quantity | Zenair | CH2000, CH200A |
| D1-211-6076 | Fuel Quantity | Zenair | CH2000, CH200A |
| D1-211-6086 | Voltmeter | Zenair | CH2000, CH200A |
| D1-211-6090 | 100 PSI Oil Pressure | American General | AA-1, AA-1a, AA-1B, AA-1C, AA-5, AA-5a, AA-5B |
| D1-211-6092 | 150 PSI Oil Pressure | Zenair | CH2000, CH200A |
| D1-211-6106 | 75 Amp Shunted Ammeter | Zenair | CH2000, CH200A |
Electric Clocks & Hourmeters
| Part Number | Gauge Function | Aircraft Manufacturer | Model |
|---|---|---|---|
| D1-211-5126 | 1-1/2 In. Sq. Hourmeter | Zenair | CH2000, CH200A |
| D1-312-5036 | Analog Clock | Zenair | CH2000, CH200A |
| D1-312-5038 | Analog ELT Clock | General Avia | F22B, F22C, F22R |
Sending Units & Mounting Hardware
| Part Number | Gauge Function | Aircraft Manufacturer | Model |
|---|---|---|---|
| PS-211-5000 | Flap Position Sender | General Avia | F22B, F22C, F22R |
| PS-211-8038 | Fuel Quantity Sender | Zenair | CH2000, CH200A |
| PS-211-8045 | 250 F Oil Temp. Sender | American General | AA-1, AA-1a, AA-1B, AA-1C, AA-5, AA-5a, AA-5B |
| PS-211-8100 | Press. Sender Mounting Kit | American Champion | 7AC, 7ACA, S7AC, 7BCM, 7CCM, S7CCM, 7DC, S7DC, 7EC, S7EC, 7ECA, 7FC, 7GC, 7GCA, 7GCB, 7GCBA, 7GCBC,7HC, 7JC, 7KCAB, 8KCAB, 8GCBC |
| PS-211-8112 | 300 F Oil Temp. Sender | Zenair | CH2000, CH200A |
| PS-211-8156 | CHT Thermocouple | Alliance (Helio) | H-391B, H-395, H-395A, H-250, H-700, H-800 |
| PS-211-8168 | CHT Thermocouple | Alliance (Helio) | H-391B, H-395, H-395A, H-250, H-700, H-800 |
| PS-211-9000 | 15/30 PSI Fuel Press. Sender | Zenair | CH2000, CH200A |
| PS-211-9039 | 100 PSI Oil Pressure Sender | Zenair | CH2000, CH200A |
| PS-211-9040 | 150 PSI Oil Pressure Sender | Zenair | CH2000, CH200A |
| PS-211-9101 | Ammeter Shunt (75A) | Zenair | CH2000, CH200A |
| PM-211-6822 | Gauge Frame | Zenair | CH2000, CH200A |
| PM-211-6823 | Gauge Frame | American General | AA-1, AA-1a, AA-1B, AA-1C, AA-5, AA-5a, AA-5B |